Security (Wheezy)

From Hexwiki
Revision as of 23:04, 9 May 2014 by Vekseid (talk | contribs)
Jump to navigation Jump to search

Security is a process, not a state. On the plus side, a lot of stuff from my earlier documentation on this has become the default in Wheezy. It is certainly made easier by not being the only one doing it.

Not all of this is strictly 'security', per se, at least from a 'keep bad people from doing bad things to you' perspective. Some elements are more about ensuring a smoother-running system.

/etc/inittab

# Since we're not using X, can enable all ttys, or alternately prep
# them all and comment most out. 
# Each one takes up about ~160kb of RAM while idle, so not a huge
# drain, and is the sort of thing swap is actually for on a server.
1:2345:respawn:/sbin/getty 38400 tty1
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
7:23:respawn:/sbin/getty 38400 tty7
8:23:respawn:/sbin/getty 38400 tty8
9:23:respawn:/sbin/getty 38400 tty9
10:23:respawn:/sbin/getty 38400 tty10
11:23:respawn:/sbin/getty 38400 tty11
12:23:respawn:/sbin/getty 38400 tty12

# ...

# You can disable ctrl+alt+del from console. Note that this might block
# remote soft reboot software.
# What to do when CTRL-ALT-DEL is pressed.
#ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now

/etc/crontab

# /etc/crontab: system-wide crontab
# Your values may of course differ. I just prefer to spread them out
# So they don't all hit at the same time, e.g. preventing 
# the monthly and weekly runs from running on the same day.
# Key is to know when your user activity is the lowest, of course.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=""

55  *  *   *       *    root    cd / && run-parts --report /etc/cron.hourly
25  5  *   *       *    root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
15  4 3,10,17,24 * *    root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
15  4  2   *       *    root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
#

/etc/securetty

# /etc/securetty: list of terminals on which root is allowed to login.
# See securetty(5) and login(1).
# I end up deleting the vast majority of these, leaving only the ones below.

console

# Virtual consoles
tty1
tty2
tty3
tty4
tty5
tty6
tty7
tty8
tty9
tty10
tty11
tty12

/etc/security/limits.conf

#<domain>      <type>  <item>         <value>
# The main thing to note here are the core dumps
# and mysql's memory access. The latter is a
# legacy element.
#
*               soft    core            0
*               hard    core            -
*               -       maxlogins       3
*               -       memlock         2048
*               -       msgqueue        1048576
*               -       nofile          8192
*               -       nproc           256
*               -       sigpending      16384
*               -       stack           8192
mysql           -       maxlogins       0
mysql           -       memlock         33554432
root            -       maxlogins       -
root            -       memlock         33554432
root            -       nproc           -

/etc/host.conf

Read hosts first, then try a domain lookup if that fails. I am far more likely to be trying to override something when I put something in my hosts file. 

order hosts,bind
multi on
nospoof on
spoofalert on

/etc/login.defs

  • LOG_OK_LOGINS yes
  • SULOG_FILE /var/log/sulog
  • CHFN_RESTRICT frwh
    • Don't ask me why I bother with this, I could not tell you : p
  • SHA_CRYPT_MIN_ROUNDS 65536
    • Or higher. Just remember what you are setting it to.

PAM

  1. Install the libpam-tmpdir package, if you have not already.
  2. /etc/pam.d/common-auth
    1. Remove nullok_secure from the auth line
  3. /etc/pam.d/su
    1. Uncomment and add group=wheel:
    2. auth required pam_wheel.so group=wheel
    3. Make sure root is part of the wheel group as precaution
  4. /etc/pam.d/common-password
    1. add 'rounds=65536' to the password line:
    2. password [success=1 default=ignore] pam_unix.so obscure sha512 rounds=65536
  5. Regenerate root, administrator passwords

Directory and file Permissions

find / -perm -2000 -group 0

This should only return directories. /var/cache/man in particular. 

chmod 0700 /root /lost+found
chmod 0751 /etc /home /etc/ssh/
chmod 0750 /mnt /boot /etc/rsyslog.d/ /etc/cron.d/ /etc/cron.hourly/ /etc/cron.daily/ /etc/cron.weekly/ /etc/cron.monthly/
chmod 0750 /storage /innodb

Or whatever you choose your database/general directories to be. I dislike /opt and /srv, at least for things that I will be dedicating entire hard drives to (or most of them). 

chgrp staff /storage

Or whatever again. 

chmod 0640 /etc/crontab /etc/fstab /etc/inittab /etc/securetty /etc/ssh/sshd_config /etc/rsyslog.conf

Clear out unnecessary setuid binaries: 

find / -perm -4000 -user 0

Only /bin/su is absolutely necessary.

  • /sbin/pam-tmpdir-helper is needed if you are using the pam tmpdir module above
  • suexec if you are still using Apache
  • screen needs setuid if using in multi-user mode.
  • sudo if you use that. Since this is a server, I find the idea of typing 'sudo' before a million commands highly annoying, personally. sudo is very much a thing for work/home machines, in my opinion.
  • ping and ping6 are somewhat annoying to leave as non-suid, but see below.

On a default Wheezy install: 

chmod u-s /usr/bin/passwd /usr/bin/chsh /usr/bin/gpasswd /usr/bin/newgrp /usr/bin/chfn /usr/lib/eject/dmcrypt-get-device /usr/lib/openssh/ssh-keysign /usr/lib/pt_chown /bin/mount /bin/umount

and 

chmod u-s /sbin/mount.nfs

If using nfs

To let a specific group of users (staff, here) use ping and ping6 

chmod 4750 /bin/ping /bin/ping6
chgrp staff /bin/ping /bin/ping6

Remove sound support

If much of the above straddles the 'security' line this probably crosses it. Still, if I hear my server that means something bad has happened.

To get sound modules: 

lsmod | grep snd

Blacklist these, along with pcspkr, in a file like /etc/modprobe.d/blacklist.conf: 

# /etc/modprobe.d/sound-blacklist.conf
# Hear no evil.
blacklist pcspkr
blacklist snd_pcm
blacklist snd_timer
blacklist snd_page_alloc
blacklist snd
blacklist snd-pcsp
blacklist soundcore

ninja

ninja is a nifty little package that kills things that inappropriately escalate to root. It is far from perfect, but I have tried to hone my configuration over the years.

/etc/ninja/whitelist

/bin/su:wheel:
/usr/bin/sudo:wheel:
/usr/bin/sudoedit:wheel:
/usr/bin/screen:mcusers:

Obviously, set screen to whomever is going to be using it accordingly. I use it for Minecraft, personally.

/etc/ninja/ninja.conf

  • group = 70
    • Your wheel group
  • interval = 0
    • You may wish to set interval to 1 as it does use some cpu. This likely renders it pointless, however.
  • proc_scan_offset = 300
  • no_kill = yes
  • no_kill_ppid = yes
    • above two are for during testing only.

Run 

ps --ppid 1

to get init ids. Still haven't figured out how to whitelist rc, debian-start or ntpdate, unfortunately, so I have not been able to force this system-wide yet.

ninjalert.sh

#!/bin/sh
mail -s "ninja triggered by user $1" root vekseid@gmail.com <<EOF
ninja activated on process escalation by user $1
EOF

Add to ninja.conf

rkhunter

As of Wheezy, the only one that has been updated.

  1. Install rkhunter and unhide
  2. In /etc/rkhunter.conf
    1. MAIL-ON-WARNING - add email addresses
    2. DISABLE_TESTS - reenable hidden_procs, suspscan
      1. We've installed unhide and /tmp and /var/tmp should be mounted tmpfs
    3. SCRIPTWHITELIST=/sbin/chkconfig
      1. False positive.
Retrieved from "http://hexwiki.com/w/index.php?title=Security_(Wheezy)&oldid=144"